Products
Introduction:
CL series marine vertical centrifugal pumps are suitable to be ballast pump, bilge pump, cooling pump and fire pump. They can transport seawater, fresh water and other incorrosive liquids.The medium temperature don’t exceed 70℃.
The typical example and its explanation for the pump type
For example：50CL-30
50-entrance diameter of the pump,mm
CL- marine vertical centrifugal pump.
30-head of the pump,m
Main technical performance parameters of the pump
When the frequency of the driving motor is 50Hz, the main
technical performancy parameters are showed in table l. And
When the frequency of the driving motor is 60Hz, the main
technical performancy parameters are showed in table 2.
Table1
| Type | voltage 380V Frequency 50Hz | ||||||
|---|---|---|---|---|---|---|---|
| Main technical Performance parameters | |||||||
| Capacity m³/h | Head m | Speed r/min | NPSHr m | Shaft power kW | Matched power kW | Pump weight Kg | |
| 50CL-30 | 20 | 30 | 2950 | 3 | 2.79 | 4 | 95 |
| 50CL-30A | 18 | 24.5 | 2950 | 3 | 2.11 | 3 | 84 |
| 65CL-45 | 30 | 45 | 2950 | 3 | 5.66 | 7.5 | 131 |
| 65CL-45A | 27 | 37 | 2950 | 3 | 4.32 | 5.5 | 126 |
| 65CL-65 | 25 | 65 | 2950 | 5 | 10.56 | 15 | 189 |
| 80CL-30 | 50 | 30 | 2950 | 3.5 | 5.75 | 7.5 | 133 |
| 80CL-30A | 45.5 | 25 | 2950 | 4.48 | 5.5 | 128 | |
| 80CL-35 | 50 | 35 | 2950 | 3.5 | 6.8 | 7.5 | 135 |
| 80CL-65 | 50 | 65 | 2950 | 5 | 13.63 | 18.5 | 272 |
| 80CL-65A | 46.5 | 56 | 2950 | 4.5 | 11.06 | 15 | 251 |
| 80CL-65B | 44 | 50 | 2950 | 4.5 | 9.5 | 15 | 242 |
| 100CL-30 | 100 | 30 | 2950 | 4.5 | 10.35 | 15 | 229 |
| 100CL-30A | 90 | 24.5 | 2950 | 4.5 | 7.8 | 11 | 221 |
| 100CL-45 | 100 | 45 | 2950 | 4.5 | 16.8 | 22 | 276 |
| 100CL-45A | 90 | 36.5 | 2950 | 4 | 12.6 | 15 | 234 |
| 100CL-85 | 100 | 85 | 2950 | 4 | 34.6 | 45 | 553 |
| 100CL-85A | 92.5 | 73 | 2950 | 4.5 | 27.8 | 37 | 483 |
| 100CL-85B | 87 | 64 | 2950 | 4.5 | 23.4 | 30 | 473 |
| 125CL-30 | 162 | 30 | 2950 | 4.5 | 17 | 22 | 278 |
| 125CL-30A | 148 | 25 | 2950 | 4.5 | 13.3 | 18.5 | 257 |
| 125CL-50 | 200 | 50 | 2950 | 6 | 34.9 | 45 | 490 |
| 200CL-30 | 300 | 30 | 1450 | 4 | 30.6 | 37 | 530 |
| 200CL-30A | 262 | 23.5 | 1450 | 4 | 21.2 | 30 | 521 |
Table2
| Type | voltage 440V Frequency 60Hz | ||||||
|---|---|---|---|---|---|---|---|
| Main technical Performance parameters | |||||||
| Capacity m³/h | Head m | Speed r/min | NPSHr m | Shaft power kW | Matched power kW | Pump weight Kg | |
| 50CL1-30 | 24 | 42 | 3500 | 4.2 | 4.43 | 5.5 | 116 |
| 50CL1-30A | 21.6 | 34 | 3500 | 4.2 | 3.19 | 4 | 95 |
| 65CL1-45 | 35 | 63 | 3500 | 4.2 | 8.96 | 11 | 176 |
| 65CL1-45A | 32 | 50 | 3500 | 4.2 | 6.7 | 7.5 | 131 |
| 65CL1-65 | 30 | 90 | 3500 | 7 | 16.7 | 22 | 223 |
| 80CL1-30 | 60 | 42 | 3500 | 4.9 | 9.53 | 11 | 178 |
| 80CL1-30A | 54 | 35 | 3500 | 4.9 | 7.35 | 11 | 178 |
| 80CL1-35 | 60 | 49 | 3500 | 7 | 11.3 | 15 | 188 |
| 80CL1-65 | 60 | 90 | 3500 | 6.3 | 22.6 | 30 | 379 |
| 80CL1-65A | 55 | 78 | 3500 | 6.3 | 18.3 | 22 | 285 |
| 80CL1-65B | 52 | 70 | 3500 | 6.3 | 15.7 | 18.5 | 263 |
| 100CL1-30 | 120 | 42 | 3500 | 6.3 | 17.4 | 22 | 263 |
| 100CL1-30A | 105 | 34 | 3500 | 6.3 | 12.6 | 15 | 229 |
| 100CL1-45 | 120 | 63 | 3500 | 5.6 | 28.2 | 37 | 278 |
| 100CL1-45A | 105 | 50 | 3500 | 5.6 | 20.1 | 30 | 362 |
| 100CL1-85 | 120 | 118 | 3500 | 6.3 | 57.6 | 75 | 753 |
| 100CL1-85A | 110 | 100 | 3500 | 6.3 | 49.5 | 55 | 651 |
| 100CL1-85B | 100 | 90 | 3500 | 6.3 | 37.7 | 45 | 551 |
| 125CL1-30 | 190 | 42 | 3500 | 6.3 | 27.9 | 37 | 380 |
| 125CL1-30A | 175 | 35 | 3500 | 6.3 | 21.9 | 30 | 364 |
| 125CL1-50 | 240 | 70 | 3500 | 8.4 | 58.7 | 75 | 690 |
| 200CL1-30 | 360 | 42 | 1750 | 5.6 | 51.5 | 75 | 800 |
| 200CL1-30A | 310 | 32 | 1750 | 5.6 | 36.3 | 45 | 559 |
| 200CL1-30B | 285 | 30 | 1750 | 5.6 | 30.6 | 37 | 528 |